Natural Gas Fired Industrial High Temp Process Oven (Bend, OR) OFF MARKET

High Temperature Process Oven
Manufacturer: Rohner Mechanical, Inc.
Serial No: Available for Serious Inquiry
Equipment Location: Bend, OR
Equipment Description: Industrial Insulated Process Oven with direct fired process heater, oven top mounted and one exhaust fan, oven top mounted. Filtered supply air is pulled from the interior of the building. Exhaust air is removed from the enclosure and delivered to the building exterior.
…24” x 36” Construction Drawings Set
…Equipment Manual CD
…Packing List
…Length: 21’-2” Overall Dimension
…Height: 14’-10 13/16”
Booth Part Components include Structure, Floor Track, Side and End Walls, Ceiling.
Motor Specifications:
…Manufacturer: Baldor Reliance Super E Motor
…Cat. No.: EM3774T
…Spec.: 07H002Y179G1
…HP: 10
…Volts: 230/460
…Amps: 24.4/12.2
…RPM: 1760
…Hertz: 60
…Phase: 3
Booth Part Descriptions:
…POHT-SLWP-10-8-20-DE – Structure
…POHT-SLWP-10-8-20-DE – Floor Track
…POHT-SLWP-10-8-20-DE – Side Walls
…POHT-SLWP-10-8-20-DE – End Walls
…POHT-SLWP-10-8-20-DE – Ceiling
…Natural Gas Direct Fired Process Heater 1.5 Million BTU
…High Temperature IPO Exhaust Fan, 2,300cfm 1,927 RPM, 1 hp, 460V/3/60, Booth Ceiling Mounted
…#01AFR2020-20 – Intake AFR1 Panel – white
…6” Insulated Product Door With 10’-0” W x 8’-0” H Clear Opening
…Compact PLC based control center – 24VDC POWER SUPPLY, 24 I/O PLC controller, PID temperature control relay with fuzzy logic and auto tuning & 5.7” QVGA color touch screen HMI. (1) exhaust fan VFD(s) with auto booth pressure.
General Notes:
…Enclosure constructed using 20 ga galvanized sheet steel cold formed, pre-punched and fabricated double skin panels insulated with 4” mineral wool insulation designed for 500 degree max operation temperature.
…Booth rigidly reinforced with 10-12 ga galvanized sheet steel columns, beams and brackets.
…Includes all assembly materials, fasteners and caulking.
…Meets or exceeds requirements of NFPA 33 and OSHA regulations.
Item is available for inspection; Equipment is three years old and NEW; equipment is still UNPACKED in crates in Owner’s shop.
Buyer responsible for freight logistics and expenses.
Seller will load onto Buyer’s transportation.
Contact MD Equipment Services LLC to schedule inspection, pickup, or purchase.
Buyer to verify all specifications and options of equipment prior to purchase.
The equipment is authentically represented.
The Seller disclaims any warranty, expressed or implied, of the year, model, hour reading, guarantee of merchantability or fitness of the equipment; the goods are sold in an “As Is, Where Is” condition.
The seller warrants that the goods are free and clear of all liens, indebtedness, or liabilities.